Academics

    MTT

    MTT 101  Introduction to Machine Tool  (2-1-2)
    Offered Fall, Spring, and Summer Semesters
    (Restricted to GE employees.  Instructor consent required.)
    This course covers the basics in measuring tools, layout tools, bench tools and basic operations of lathes, mills, and drill presses.

    MTT 105  Machine Tool Math Applications  (3-0-3)
    Offered Fall, Spring, and Summer Semesters
    Prerequisites: MAT 032, RDG 100
    This course is a study of shop math relevant to the machine tool trade.  The following topics will be covered:  fractions, decimal and metric systems, tolerances, clearance, interference, percents, area and volume, ratios and proportions, angles and lines, triangles, polygons, circles and tangents, Pythagorean theorem, trigonometry, right triangles, sine bars and sine plates, and other geometric formulas.

    MTT 120  Machine Tool Print Reading  (3-0-3)
    Offered Fall, Spring, and Summer Semesters
    Prerequisites: MAT 032, RDG 100
    This course is designed to develop the basic skills and terminology required for visualization and interpretation of common prints used in the machine tool trades.  The course is an introduction in the identification of lines, basic sketching, dimensioning of parts, geometric tolerancing, and visualizing three-dimensional shapes from two-dimensional drawings.

    MTT 121  Machine Tool Theory I  (3-0-3)
    Offered Fall, Spring, and Summer Semesters
    Prerequisites: MAT 032 and placement into ENG 101
    This course covers the principles involved in the production of precision metal parts. This course includes the operation of the milling machine and lathe.  A rigid introduction to the basic handling of machinist hand tool, precision measuring instruments.  Safety will be stressed.

    MTT 122  Machine Tool Practice I  (0-12-4)
    Offered Fall, Spring, and Summer Semesters
    This course covers practical experiences using the principles in Machine Tool Theory I.  This course builds proficiency in the use of the lathe and milling machine operations and the basic knowledge of the surface grinder.  Also, this course gives further experience with precision measuring instruments, lathe accessories for basic internal and external lathe operations and set ups.

    MTT 123  Machine Tool Theory II  (3-0-3)
    Offered Spring Semester
    Prerequisite:  MTT 121
    This course covers the principles involved in machining parts using machine tools, including lathes, mills, drill presses, jig bores, and the attachments for each.  Instruction in selection of feed and speeds for single and multi-point tools based on the machinability of the different types of metals.

    MTT 124  Machine Tool Practice II  (0-12-4)
    Offered Fall, Spring, and Summer Semesters
    Prerequisite:  MTT 122
    This course covers the practical application of the principles in Machine Tool Theory II.  Further instruction in the operation of the surface grinder, milling machine, lathe to produce advanced projects, as well as operation of the cylindrical grinder for external grinding operations and internal grinding will be offered.  Safety and good housekeeping will be stressed at all times.

    MTT 126  Machine Tool Practice III  (0-12-4)
    Offered Fall, Spring, and Summer Semesters
    Prerequisite: MTT 124
    This course covers the practical application of the principles in Machine Tool Theory II.  Advanced work with basic machine tools in producing industrial-style projects will be accomplished in the development of accuracy, speed, safety, workmanship and skill.

    MTT 141  Metals and Heat Treatment  (3-0-3)
    Offered Spring Semester
    This course is a study of the properties, characteristics, and heat treatment procedures of metals. This course covers the selection of steel by its color-codes and gives an understanding of heat treatment terminology, procedures and testing.  Also, the elementary principles concerning metals, their production, composition, and individual properties and uses will be covered.

    MTT 145  Machining of Metals  (3-0-3)
    Offered Summer Semester
    This course covers theoretical and practical training in the physical properties of metals, their required stock removal/speeds/feeds/and depths of cut, and finish requirements.  The course builds increased proficiency in operating the engine lathe and surface grinder, milling machine and the cylindrical grinder.  Also covers speeds, feeds and tooling for numerical controlled machines.

    MTT 211  Die Theory  (3-0-3)
    Offered Fall Semester
    This course is a study of die components as they relate to the complete die.  Essential facts of cutting and forming operations are explained and related to the manner in which the dies must function in order to achieve the desired results.

    MTT 222  Tool and Diemaking Practice I  (0-12-4)
    Offered Fall, Spring, and Summer Semesters
    Prerequisite:  MTT 126
    This course covers the manufacture of a simple cutting die or tools.  Instruction will include machining and constructing jigs and fixtures or cutting dies in simulated industrial situations.  Students will utilize the skills previously developed in the use of all tool room equipment and machines.

    MTT 224  Tool and Diemaking Practice II  (0-12-4)
    Offered Fall, Spring, and Summer Semesters
    Prerequisite:  MTT 222
    This course covers the construction of a compound and/or progressive die or tools.  The course includes instruction in constructing more complex tooling with minimum assistance.  Dies such as cutting, blanking and piercing and/or advanced tooling will be emphasized.

    MTT 241  Jigs and Fixtures I  (1-3-2)
    Offered Summer Semester
    Prerequisite:  MTT 120
    This course includes the theory necessary to design working prints of simple jigs and fixtures.  Students will be instructed on the theory involved in designing jigs and fixtures as well as actual design or working drawings of drill jigs and milling fixtures.

    MTT 245  Rapid Prototype Setup and Operations  (2-3-3)
    Offered Summer Semester
    This course is an introduction to the set-up, operation, prototyping of parts, maintenance, and safety of rapid prototyping equipment.

    MTT 250  Principles of CNC  (3-0-3)
    Offered Fall and Spring Semesters
    Prerequisites:  MTT 105, MTT 120, MTT 121, MTT 122, or permission of department head
    This course is an introduction to the coding used in CNC programming.  The course covers G-codes, M-codes, T-codes, S-codes and coordinate systems feature, and RS-232.  The course also covers program planning and simple programming for CNC machining centers and CNC turning centers.

    MTT 251  CNC Operations  (1-6-3)
    Offered Fall and Spring Semesters
    Prerequisite:  MTT 250
    This course is a study of CNC machine controls, setting tools, and machine limits, and capabilities. 

    MTT 252  CNC Setup and Operations  (2-6-4)
    Offered Summer Semester
    Prerequisite:  MTT 251
    This course covers CNC setup and operations.  Instruction is primarily applied to milling and drilling operations.  Instruction will be given in writing a sequence of operations, the alignment of fixtures, proper loading of the work piece, the reading and interpretation of sequence of action codes and how to verify the program.  The course includes topics on how to measure parts and recognize problems.

    MTT 253  CNC Programming and Operations  (1-6-3)
    Offered Fall Semester
    Prerequisite:  MTT 252
    This course is a study of the planning, programming, selecting tooling, determining speeds and feeds, setting up, operating, and testing of CNC programs on CNC machines.  It is intended to teach skills and knowledge sufficient to recognize problems.

    MTT 254  CNC Programming I  (1-6-3)
    Offered Summer Semester
    This course is a study of CNC programming, including machine language and computer-assisted programming.  Topics covered in the course are milling and drilling operations, lathe operations, and feeds and speeds.  Also covered is post processing.  The operational software used is Esprit WCAM.

    MTT 255  CNC Programming II  (1-6-3)
    Offered Fall Semester
    Prerequisite:  MTT 254
    This course includes CNC programming with simulated production conditions.  Topics included in the course are multi-axis surface milling operations, drilling operations, lathe operations including the programming of live tooling and part creation in solids. The operational software used is Master CAM.

    MTT 258  Machine Tool CAM  (1-6-3)
    Offered Spring Semester
    This course is a study of computer-assisted manufacturing graphics systems needed to create CNC programs.  Topics covered in the course are wire EDM in 2D and 3D machining and part creation in solids.  Post processing is also covered.  The operational software used is Esprit CAM.

    MTT 260 Advanced Multi-Axis Programming and Operations I  (2-6-4)
    Offered Spring Semester
    Prerequisite:  MTT 255
    This course is a study of programming advanced CNC multi-axis machines, setting of tools, machine limits, capabilities, and safety.  Programming will be done with advanced CAD/CAM software to create and/or import wire frame surface part models for programming.

    MTT 261 Advanced Multi-Axis Programming and Operations II  (2-6-4)
    Offered Summer Semester
    Prerequisite:  MTT 260
    This course is a study of advanced CNC multi-axis machine programming, advanced contouring, and simultaneous multi-axis machining of 3D parts.  Programming will be done with advanced CAD/CAM software to create and/or import the solid part model for programming.